track systems

All our Steel track sets are roll-formed and come in a large selection of finishes to match the Steel frame finishes (Linear, Classic and Shaker).

Our Aluminium doors (Contour, Minimalist and Switch) work with our new ‘patented‘ universal track system. This system can be extended in both length and in depth. The Deluxe Shaker doors and Switch Top Hung doors take a different track system, that can extend in length and come in matching finishes to the frames.

| universal trackset

Our patented Aluminium Universal track system is compatible with our Minimalist, Switch, and Contour door ranges. The symmetrical design means this is suited for both single and double-sided door use. The bottom tracks have been engineered to include an inward chamfered edge on the wheel channel, allowing the wheels to run smoother while reducing the level of wear and tear that they experience over time.

Single Top TracK

L5000mm H51mm D40mm
3666

Double Top Track

L5000mm H51mm D81mm
3899

Top Track Extension

L5000mm H51mm D40mm
3670

Single Bottom Track

L5000mm H8mm D36mm
3819

Double Bottom Track

L5000mm H8mm D75mm
3667

Triple Bottom Track

L5000mm H8mm D114mm
3820

Extending the UNIVERSAL Track

EXTENDING THE TOP TRACK

To add an extra channel to the top track use the extension piece (3670). Making sure the tracks are the same length, align them and slide the ‘track joining pins’ into place (inc’ in the extension kit).

Can not be done whilst in situ.

LENGTHENING THE TOP TRACK

To extend the length of the top track, fit the ‘track joining pins’ and ‘joining moulding’ to one track (as shown), then slide the second track into place (pins and moulding inc’ with the tracks).

Can not be done whilst in situ.

LENGTHENING THE bottom TRACK

To extend the length of the bottom track, fit the ‘track joining pins’ to one track partly overhanging the edge (as shown), then slide the second track into place (pins inc’ with the tracks).

Can not be done whilst in situ.

| DELUXE SHAKER trackset

Our Deluxe Shaker doors use a different Aluminium track system to the other doors, but still maintains the attention to detail. The symmetrical design for the top track is suited for both single and double-sided door use. The bottom tracks have been engineered to include an inward chamfered edge on the wheel channel, allowing the wheels to run smoother while reducing the level of wear and tear that they experience over time.

Double Top Track

L5000mm H48mm D93mm
3352

Double Bottom Track

L5000mm H8mm D125mm
3355

Track Joining Pin

To achieve longer track lengths for the Deluxe Shaker.
2115-000

| STEEL tracksetS

Our steel track system is roll-formed and colour matched to the same finishes as the steel frames in the Linear, Shaker and Classic door ranges. The top track features an extended fascia, which keeps the appearance of the sliding wardrobe uncluttered.